|
Applications of silicon rubber for cake molds:
Silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc
Features of silicone rubber for cake molds:
1. Good characteristics of easy-operation
2. Ligh viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
Operations of silicone rubber for cake molds:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
Step Three: Perfusion Molding
The perfusion molding is an easy way to make molds, it’s Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction.
Why isn’t the silicon mold acid & alkali and aging resistant?
It is due to the addition of the silicon oil. Normally we do not advise our customers to add any silicon oil into the silicon rubber. If it is necessary, the ratio must be 5%-10%.
For getting further information about silicone rubber for cake molds, PLS contact with Miss Nancy
TEL: +86-755-85224692 or
Mobile: +86-13632528794
Email: hyr(at)szrl(dot)net
Website : www(dot)szrl(dot)net
|
|
|
|
|
|
|
| Posted by |
nancy feng
|
| e-Mail | Contact company |
Company
| Shenzhen Hong Ye Jie Technology Co., Ltd.
| | Address | Hongling Road, Liulian pingdi,longgang | City & ZIP
| 518117
| Country
|
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | reading | | Company Profile | Hong Kong Hong Ye Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design ,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller, etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
| | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | silicon rubber for mold making | | Product Specifications | Features of silicone for cake molds making :
silicone for cake molds making has good elasticity, non-deformation , high temperature resistance, low shrinkage. And it is suitable for manual mold design and small duplication mold production.
| | Industry Category | silicone rubber for cake molds making | | Quality/Safety Certifications | ISO9001:2000 | | Delivery Lead Time | within 3 days after payment confirmed in our bank | | Payment & Price Terms | L/C or T/T | | My Offers | RTV molding silicone,shoe mold rubber,pad printing silicon,silicon oil,107 base,molding silicone rubber,manual mold silicone,candle mold silicone,HTV silicone rubber,liquid silicone rubber | | Product Portfolio / Other Products | | | Customers | North America
South America
Eastern Europe
Southeast Asia
Mid East
Eastern Asia
Western Europe
| | Detailed Company Introduction | | | FOB Price & Port | 10million | | Packaging Details | 60 | | Our Team | For getting further information about pad printing silicone rubber, PLS contact with Miss Nancy
TEL: +86-755-85224692 or
Mobile: +86-13632528794
Email: hyr(at)szrl(dot)net
Website : www(dot)szrl(dot)net
| | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
258547 |
| Visits |
81 |
| Date |
2010.07.30 |
|
|
|  |
|
|
Trademetro.net Trade Leads / Chemical / Rubber and Plastics
Company Profile
Contact
TradeMetro.net Member Login
