Advertisements
Trademetro.net Trade B2B Portal / Chemical / Adhesives and Sealants

Advertisement


 































Name


High temperature resistant adhesiveTHO4098


Outline


It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright.


Applications


It applies to the coating and encapsulating of device surface, electronic components and chips to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the coating of sensors which works in tough conditions such as extreme weathers, temperature shocks and so forth.   


Features


It is one-component white viscous fluid.

It cures within 20 minutes when heated with the temperature 80-100°C.

It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.

Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.

Being moderate in viscosity, the surface appears smooth and bright after curing.

Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it...

You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.

Flame retardance: comply with UL94-V0.

Non-toxic after it cures and it is upto the RoHS standard.

Being stable, its shelf life is one year when stored at the temperature of 5°C.

The main technical parameters are as follows:

Heat resistance scope- 52 °C—+ 450 °C   

Non-yellowing test: it stays white when heated at the temperature of 280°C for 6 hours    viscocity: 10000-15000mpa.s

voltage withstand  28-35.5kV/mm     hardness: shore D85

Tensile strength≥25MPa; bending strength≥23 Mpa  compressive strength≥75MPa   shearing strength≥28.8Mpa   shock strength≥17KJ/m*m


Instruction


1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss or smear the substrates with the special liquid.

2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120°C, wait for one minute and let it dry


Notes


1. Better to keep the working place well ventilated.

2 .If it has contact with skin, you should wash with soap.

3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.



                Copyright © 2005-2014 Thomas Technology, Inc. All Rights Reserved.

 


Advertisements
   


Posted by Natural Wang
e-MailContact company
Company
Thomas Sci Co.,Ltd
Address 68# Yangzi Mount Road of Chengdu
City & ZIP
chegndu
Country
China
Phone
For registered Members only.
Fax
For registered Members only.
Key Customers / Clientele CAS, electronic factories.
Company Profile Specializing in developing, manufacturing and marketing adhesives, Thomas is committed to creating the best for ever products of its field and providing tailored technical support for its customers. Backed up by a highly skilled technicians and ongoing researching and developing centers, supported by the experts in the field. Thomas offers innovative products with fabulous versatility of use in many different applications. What Thomas offers isn?t only the best quality professional adhesives, it also supplies you with comprehensive solutions tailored to your specific needs and long-term business strategy and economic schemes.
URLFor registered Members only.
Rating (0 reviews)
Popular tags
Quantity range (lots) Price (per lot) Process time (Days)
1 - 100 € 100 15

Shipping
Shipping Service Shipping to Estimated delivery time Shipping cost
DHL

Unit Price 100
Currency euro
Item Specifics Name High temperature resistant adhesive(THO4098) Outline It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright. Applications It applies to the coating and encapsulating of device surface, electronic components and chips to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the coating of sensors which works in tough conditions such as extreme weathers, temperature shocks and so forth. Features It is one-component white viscous fluid. It cures within 20 minutes when heated with the temperature 80-100C. It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient. Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. Being moderate in viscosity, the surface appears smooth and bright after curing. Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it... You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Flame retardance: comply with UL94-V0. Non-toxic after it cures and it is upto the RoHS standard. Being stable, its shelf life is one year when stored at the temperature of 5C. The main technical parameters are as follows: Heat resistance scope:- 52 C+ 450 C Non-yellowing test: it stays white when heated at the temperature of 280C for 6 hours viscocity: 10000-15000mpa.s voltage withstand 28-35.5kV/mm hardness: shore D85 Tensile strength≥25MPa; bending strength≥23 Mpa compressive strength≥75MPa shearing strength≥28.8Mpa shock strength≥17KJ/m*m Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss or smear the substrates with the special liquid. 2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120C, wait for one minute and let it dry Notes 1. Better to keep the working place well ventilated. 2 .If it has contact with skin, you should wash with soap. 3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it. Copyright 2005-2014 Thomas Technology, Inc. All Rights Reserved.
Product name thomas high temperature resistant adhesive
Payment method TT
Item Code adhesive
Category Chemical/Adhesives and Sealants
Description

 

Name
High temperature resistant adhesiveTHO4098
Outline
It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright.
Applications
It applies to the coating and encapsulating of device surface, electronic components and chips to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the coating of sensors which works in tough conditions such as extreme weathers, temperature shocks and so forth.   
Features
It is one-component white viscous fluid.
It cures within 20 minutes when heated with the temperature 80-100°C.
It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Being moderate in viscosity, the surface appears smooth and bright after curing.
Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it...
You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Flame retardance: comply with UL94-V0.
Non-toxic after it cures and it is upto the RoHS standard.
Being stable, its shelf life is one year when stored at the temperature of 5°C.
The main technical parameters are as follows:
Heat resistance scope- 52 °C—+ 450 °C   
Non-yellowing test: it stays white when heated at the temperature of 280°C for 6 hours    viscocity: 10000-15000mpa.s
voltage withstand  28-35.5kV/mm     hardness: shore D85
Tensile strength≥25MPa; bending strength≥23 Mpa  compressive strength≥75MPa   shearing strength≥28.8Mpa   shock strength≥17KJ/m*m
Instruction
1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss or smear the substrates with the special liquid.
2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120°C, wait for one minute and let it dry
Notes
1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
                Copyright © 2005-2014 Thomas Technology, Inc. All Rights Reserved.
 
Quantity 100000
Package Size 14*18*14
Gross Weight/Package 1.14
Packaging Details in can
Port shanghai
Min Order 1
ODM & OEM
Country of origin China

View Reviews and Comments

 Leave a comment *login-required
     
Title  
 
Comment    
Code 
 
     

Product Details
 Product id  83367
 Visits   108
 Date  ..
 




Similer Products
thomas high temperature resistant adhesive  Name High temperature resistant adhesive(THO4098) Outline It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright. Applications It applies to the coating and encapsulating of device surface, electronic components and chips to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the coating of sensors which works in tough conditions such as extreme weathers, temperature shocks and so forth.    Features It is one-component white viscous fluid. It cures within 20 minutes when heated with the temperature 80-100°C. It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient. Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. Being moderate in viscosity, the surface appears smooth and bright after curing. Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it... You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Flame retardance: comply with UL94-V0. Non-toxic after it cures and it is upto the RoHS standard. Being stable, its shelf life is one year when stored at the temperature of 5°C. The main technical parameters are as follows: Heat resistance scope:- 52 °C—+ 450 °C    Non-yellowing test: it stays white when heated at the temperature of 280°C for 6 hours    viscocity: 10000-15000mpa.s voltage withstand  28-35.5kV/mm     hardness: shore D85 Tensile strength≥25MPa; bending strength≥23 Mpa  compressive strength≥75MPa   shearing strength≥28.8Mpa   shock strength≥17KJ/m*m Instruction 1. To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss or smear the substrates with the special liquid. 2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120°C, wait for one minute and let it dry Notes 1. Better to keep the working place well ventilated. 2 .If it has contact with skin, you should wash with soap. 3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.                 Copyright © 2005-2014 Thomas Technology, Inc. All Rights Reserved.  
thomas moisture resistant adhesive  Name        High temperature and moisture resistant adhesive(THO4095-II) Outline It is heterocyclic adhesive which cures fast when heated. it is temperature resistant and easy to operate. No bubbles appear after curing thus making the surface smooth and bright. Its viscosity and heat resistant property is adjustable. Applications        It applies to the coating, infiltrating and encapsulating of device surface, electronic components and chips in electric engine, capacitor, thermocouples, transformers, rectifiers, electronic modules LSI and other products to protect them against moisture, chemicals, excessive heat, vibration, mechanical impact and thermal shocks. It also applies to the bonding of metals, alloy, ceramics, glass and transparent compound which work under water or in some humid environment. Features It is one-component transparent thick liquid. It cures within one minute when heated with the temperature 120°C for one minute. It is resistant to shock, ultraviolet light and extreme weather once it cures because it is durable and with good ductility and low contraction coefficient. Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature. Being moderate in viscosity, the surface appears smooth and bright after curing. Apply the adhesive to the surface of the substrates directly or fill it into the gap, then heat it... You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Being stable, its storage time is one year. The main technical parameters are as follows: Heat resistance scope:- 52 °C—+ 325 °C    volume resistance: 1.7×1015Ω.cm    sheet resistance   2.5×1015Ω voltage withstand  28-35.5kV/mm     hardness  shore D85 dielectric coefficient:4.4 Tensile strength≥35MPa; bending strength≥65 Mpa  compressive strength≥175MPa   shearing strength≥28.8Mpa   shock strength≥17KJ/m*m Instruction 1.To get the best results, the two surfaces being bonded should be free of oils, dirt, moisture and other contaminants and should be slightly roughed or sanded to remove gloss. 2. Spray the adhesive on the substrates, put them together and apply some strength on them, heat it with 120°C, wait for one minute and let it dry Notes 1. Better to keep the working place well ventilated. 2 .If it has contact with skin, you should wash with soap. 3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it. Copyright © 2005-2014  Thomas Technology, Inc. All Rights Reserved.