Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting.
Working Principle of Jaw Crusher:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
Company Name: HeNan ZhengZhou Vipeak Heavy Industry Machinery Co., Ltd
TEL : 86-371-67770550
msn[This information will show after login with premium membership]
[This information will show after login with premium membership]
http://www.vipeakgrinder.com/belt_conveyor.html
[This information will show after login with premium membership]
[This information will show after login with premium membership]
http://www.raymondgrindingmill.org
[This information will show after login with premium membership]
|
Trademetro.net Trade Leads / Machinery and Equipment / Industrial Supplies / Industrial Machinery Manufacturers
Company Profile
Contact
TradeMetro.net Member Login
(0 reviews)
