| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Pumps and Valves
 |
Geothermal submersible borehole pump (deep well water pump)
Geothermal submersible borehole pump (deep well water pump)
The products are important water-lifting equipments in projects of geothermal development and utilization.
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw
... |
0 (#0) |
42 |
2012.03.21 |
 |
Pumps and Valves
 |
Axial Flow Pump
Axial Flow Pump
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw
... |
0 (#0) |
21 |
2012.03.21 |
 |
Pumps and Valves
 |
Submersible borehole pump
Submersible borehole pump (deep well water pump)
Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw
... |
0 (#0) |
26 |
2012.03.21 |
 |
Pumps and Valves
 |
air pump
our this air pump is a knid of dual-purpose device of blowing and inspiration.it has conpact strusture,light weight,small valume,low noise and needing no change mechanism.after from bearing
model:XGB-6G
motor power:5.5kw
air flow:360m3/hr
air pressure:38kpa
air suction:26.5kpa
... |
0 (#0) |
35 |
2012.03.19 |
 |
Pumps and Valves
|
API check valve
Product Description
API swing check valve
1) Pressure150LB 600LB,
2) Temperature: -29 550C
3) Oil,
1) Pressure150LB 600LB,
2) Temperature: -29 550C
3) Oil, chemical industry, power station, etc.
4) Medium: Water, Oil, Gas, etc.
2. API Swing check valve Structure and ... |
0 (#0) |
36 |
2012.03.15 |
 |
Pumps and Valves
 |
Model code
MP (S) 100 --2 (A)
MP-----Grinder pump
S-----Single phase
100----P2X100
2---- Pole number
A----With float switch automatic type... |
0 (#0) |
23 |
2012.02.13 |
 |
Pumps and Valves
 |
High Flow Rotary Drum Pump
High Flow Rotary Drum Pump (Plastic)
RP150P with FKM seal, PPS vane, PP suction tube, PP or 304SS spout.
Applicable Drum: 5,15,30 and 55 g
High Flow Rotary Drum Pump (Plastic)
RP150P with FKM seal, PPS vane, PP suction tube, PP or 304SS spout.
Applicable Drum: 5,15,30 and 55 gallon containers.
Applicable Liquids: A... |
0 (#0) |
35 |
2012.02.01 |
 |
Pumps and Valves
 |
Lever Acting Drum Pump
Lever Acting Drum Pump
P490S Polypropylene body, PP telescopic tube, 304SS rod, PE piston, PP spout.
Application: acid and alkaline solutions, alcohol, diesel fuel, g
Lever Acting Drum Pump
P490S Polypropylene body, PP telescopic tube, 304SS rod, PE piston, PP spout.... |
0 (#0) |
32 |
2012.02.01 |
 |
Pumps and Valves
 |
Plastic Rotary Drum Pump
Plastic Rotary Drum Pump
With PTFE seal, PPS vane, PP spout, PP suction tube.
The outlet can be freely adjusted from 0 to 360°
Plastic Rotary Drum Pump
With PTFE seal, PPS vane, PP spout, PP suction tube.
The outlet can be freely adjusted from 0 to 360?
Applicable Liquids: acid, alkali, gasoline, diesel, ... |
0 (#0) |
36 |
2012.02.01 |
 |
Pumps and Valves
 |
High Quality Chemical Piston Pump
High Quality Chemical Piston Pump
RP20P: With PP piston, 3pcs PP telescopic tube.
RP20PT: With PTFE piston, 3pcs PP telescopic tube.
High Quality Chemical Piston Pump
RP20P: With PP piston, 3pcs PP telescopic tube.
RP20PT: With PTFE piston, 3pcs PP telescopic tube.... |
0 (#0) |
34 |
2012.02.01 |
 |
Pumps and Valves
 |
High Flow Pump
This versatile drum pump is suitable for the Transfer of low, viscosity fluids such as Gasoline, Kerosene, Diesel, machine oil, etc.
Counterclockwise or clockw
This versatile drum pump is suitable for the Transfer of low, viscosity fluids such as Gasoline, Kerosene, Diesel, machine oil, etc.
Counterclockwise or clockwise for discharging or suctioning ... |
0 (#0) |
34 |
2012.02.01 |
 |
Pumps and Valves
|
Drilling mud process system
Drilling mud process system including o&g drilling fluid circulation, slurry separation unit,
This versatile drum pump is suitable for the Transfer of low, viscosity fluids such as Gasoline, Kerosene, Diesel, machine oil, etc.
Counterclockwise or clockwise for discharging or suctioning ... |
0 (#0) |
22 |
2011.12.27 |
 |
Pumps and Valves
 |
API Gate Valve,Z41H/W/Y
Product: API gate valve
Product: API gate valve
Pressure Rating: 150LB- 1500LB
Specification: 2"-24"
Material: WCB, CF8, CF8M, CF3, CF3M
Standard flanges: API6D.API600.API598
... |
0 (#0) |
24 |
2011.12.21 |
 |
Pumps and Valves
 |
Graphite Packing Reinforced with Metal Wire
Graphite packing reinforced with wire is braided from expanded graphite yarns, reinforced with metal wire, normally reinforced with inconel wire. It retains all the in
according your request ... |
0 (#0) |
27 |
2011.11.17 |
 |
Pumps and Valves
 |
Flexible Graphite Packing
Flexible graphite packing braided from expanded graphite yarns, reinforced of cotton fiber, glass fiber, carbon fiber, etc. It has good thermal and chemical resistance and high elasticity. Low f
according your request ... |
0 (#0) |
26 |
2011.11.17 |
 |
Pumps and Valves
 |
D,MD series multi-stage centrifugal pumpFlow range : Q=6.3~450 m3/h
Lift range : H=75~603m
Diameter range: φ40~φ250mm
Temperature range: 0 ~105 centigrade
D pump is single-suction multi-stage sub-type centrifugal pump, and it is used to suction deliver water and the other liquid whose physical and chemical properties similar to water. If Change the mate... |
0 (#0) |
43 |
2011.10.18 |
 |
Pumps and Valves
 |
WQ sewage submersible pump 1.Flow range :5~300 m3/h
2.Lift range : 5~240m
3.Diameter range: φ25~φ200mm
WQ sewage submersible pump is non-clogging sewage pump developed on the basis of the introduction of foreign advanced technology, now is the most advanced internal sewage systems. Features:not... |
0 (#0) |
46 |
2011.10.18 |
 |
Pumps and Valves
 |
ISW horizontal channel pump1.Flow Range:1.5-1200 m3/h
2.Lift Range:8~150m;
3.Diameter Range:φ=25~500mm;
4.Temperature Range:0 centigrade~40 centigrade;
ISW single-stage single-horizontal centrifugal pump , using the latest hydraulic model ,meet ISO2858 requirements. Products are strictly accordance with the relevant requirements to be organized and... |
0 (#0) |
34 |
2011.10.18 |
 |
Pumps and Valves
 |
ISG vertical channel pump1.Flow Range:1.5-1200 m3/h
2.Lift Range:7~36m;
3.Diameter Range φ=25~500mm;
4.Temperature Range centigrade~40 centigrade;
ISG series single-stage single-suction vertical centrifugal pumps are our company adopts the virtue of IS centrifugal pumps? performance parameters and vertical pump structure , strict accordance wi... |
0 (#0) |
25 |
2011.10.18 |
 |
Pumps and Valves
 |
QS small submersible pump1.Flow range : 10-250 m3/h
2.Lift range : 5-121m
3.Diameter scope: φ30-φ150mm
4.Temperature range: ≤30 centigrade
1.Flow range : 10-250 m3/h
2.Lift range : 5-121m
3.Diameter scope: φ30-φ150mm
4.Temperature range: ≤30 centigrade
Ⅱ Product overview :
QS subme... |
0 (#0) |
26 |
2011.10.18 |
 |
Pumps and Valves
 |
QY oil-filled pump1.Flow range: 10?100 m3/h;
2.Head range:5?54 m;
3.Diameter scope:φ51?φ152mm;
4.Temperature range: ≤40 centigrade.
QY submersible pumps are widely used in agriculture irrigation, sprinkler irrigation, well water lifting and the water supply, drain system of industrial and civil building, as well as the hill, mount... |
0 (#0) |
36 |
2011.10.18 |
 |
Pumps and Valves
 |
QJ well submersible pump 1. Flow range : 10-500 m3/h
2. Lift range : 10-600m
3. Applicable well Borehole diameter : φ175-φ400mm
4.Diameter scope:φ32?φ203mm;
5.Temperature range: -15?80 centigra
QJ submersible pumps are widely used in agriculture irrigation, sprinkler irrigation, well water lifting and water supply, drain system of industrial and civil building, as well as the hill, mount... |
0 (#0) |
31 |
2011.10.18 |
 |
Pumps and Valves
 |
F32 Angle Valve
ICDXRF-AG
CAST IRON ANGLE VALVE AND ANGLE TYPE GLOBE CHECK VALVE, PN10, FLANGED ENDS, HANDWHEEL;
1) Standard
Design: DIN3352
Face to
ICDXRF-AG
CAST IRON ANGLE VALVE AND ANGLE TYPE GLOBE CHECK VALVE, PN10, FLANGED ENDS, HANDWHEEL;
1) Standard
Design: DIN3352
Face to Face: DIN3202-F32
Flange: D... |
0 (#0) |
56 |
2011.09.26 |
 |
Pumps and Valves
 |
Lining Rubber Wafer Check Valve (ICHXRF-LTDD)
ICBXRF-SW
CAST IRON BS SWING CHECK VALVE, PN10, FLANGED ENDS;
1)Standard
Design: API594
Face to Face: EN558
Flange: BS4504,
ICBXRF-SW
CAST IRON BS SWING CHECK VALVE, PN10, FLANGED ENDS;
1)Standard
Design: API594
Face to Face: EN558
Flange: BS4504, ANSI B16.5, DIN2531/2532/2533 ... |
0 (#0) |
44 |
2011.09.26 |
 |
Pumps and Valves
 |
BS5153 Swing Check Valve (ICBXRF-SW)
ICBXRF-SW
CAST IRON BS5153 LINING RUBBER DISC (RESILIENT SEATED) SWING CHECK VALVE, PN10, FLANGED ENDS;
1)Standard
Design: BS5153
Fa
ICBXRF-SW
CAST IRON BS5153 LINING RUBBER DISC (RESILIENT SEATED) SWING CHECK VALVE, PN10, FLANGED ENDS;
1)Standard
Design: BS5153
Face to Face: BS 5153
Flange: ... |
0 (#0) |
60 |
2011.09.02 |
 |