| Directory |
Trade Leads |
Rated |
Visits |
Date |
Images |
Cast and Forged
|
 forged shaft, free forgings, open die forging
steel forgings--shafts
material: 4130, 4140,GS45, or according to customer's material specification
Delivery status:pass NDT examination.(UT, MT, DT)
maximum diameter
%E_6% |
0 (#0) |
54 |
2011.10.23 |
 |
Cast and Forged
|
forged shafts, open die forgings, free forgings
steel forgings:shafts
material:GS52, GS34CrMo4, 4130,4140,or according to customer's material specification
maximum diameter 1200mm
maximum length &n
%E_6% |
0 (#0) |
48 |
2011.10.23 |
|
Cast and Forged
|
steel forgings, shafts, open die forgings
steel forgings--shafts
material: 4130, 4140,GS45, or according to customer's material specification
Delivery status:pass NDT examination.(UT, MT, DT)
maximum diameter
%E_6% |
0 (#0) |
51 |
2011.10.23 |
|
Cast and Forged
|
forged shafts, free forgings, open die forgings
forgings:shafts
material: 4130, GS20Mn5, GS34CrMo4
forging machine:hydraulic forging press, hydraluic hammer
Test method: UT, MT
delivery status: after finshed fi
forgings:shafts
material: 4130, GS20Mn5, GS34CrMo4
forging machine:hydraulic forging press, hydraluic hammer
Test method: UT, MT
delivery status: after finshed final machin... |
0 (#0) |
51 |
2011.10.23 |
|
Cast and Forged
|
shafts, open die forgings, free forgings
steel forgings--shafts
material: 4130, 4140,GS45, or according to customer's material specification
Delivery status:pass NDT examination.(UT, MT, DT)
maximum diameter
forgings:shafts
material: 4130, GS20Mn5, GS34CrMo4
forging machine:hydraulic forging press, hydraluic hammer
Test method: UT, MT
delivery status: after finshed final machin... |
0 (#0) |
59 |
2011.10.23 |
|
Cast and Forged
|
steel pipes, open die forgings, hot forgings
steel tube forgings
maximum OD:2000mm
minimum ID: 200mm
maximum length:6000mm
forging press:hydraulic forging press.
delivery status: pass UT and MT and a
steel tube forgings
maximum OD:2000mm
minimum ID: 200mm
maximum length:6000mm
forging press:hydraulic forging press.
delivery status: pass UT and MT and after finis... |
0 (#0) |
46 |
2011.10.23 |
|
Cast and Forged
|
steel pipes, free forgings, open die forgings
oilfield products:steel tube forgings
forging machine: hydrulic hammer
test pressure: 70Mpa
Material : GS25CrNiMo4, GS34CrMo4, 4130
Delivery status:after fi
oilfield products:steel tube forgings
forging machine: hydrulic hammer
test pressure: 70Mpa
Material : GS25CrNiMo4, GS34CrMo4, 4130
Delivery status:after finished rough m... |
0 (#0) |
51 |
2011.10.23 |
|
Cast and Forged
|
forged wheel, free forging, open die forging
steel forgings:wheel ;
Material: 4130,4140, GS45,GS20Mn5 or according to customers material specification ;
Forging machine:hydraulic forging press ;
Maximum diamet
steel forgings:wheel ;
Material: 4130,4140, GS45,GS20Mn5 or according to customers material specification ;
Forging machine:hydraulic forging press ;
Maximum diameter: 4000mm ... |
0 (#0) |
54 |
2011.10.23 |
|
Cast and Forged
|
oilfield forgings, free forgings
oilfield forgings :low alloy steel forgings
forging equipment:hydraulic forging press
material: GS25CrNiMo4, GS34CrMo4, 4130
test pressurs: 14Mpa,21Mpa, 35Mpa,70Mpa, 105M
oilfield forgings :low alloy steel forgings
forging equipment:hydraulic forging press
material: GS25CrNiMo4, GS34CrMo4, 4130
test pressurs: 14Mpa,21Mpa, 35Mpa,70Mpa, 105Mpa
... |
0 (#0) |
51 |
2011.10.22 |
|
Cast and Forged
|
open die forgings, flanges
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Deli
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery status... |
0 (#0) |
54 |
2011.10.22 |
|
Cast and Forged
|
forged flanges, free forgings
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Deli
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery status... |
0 (#0) |
46 |
2011.10.22 |
|
Cast and Forged
|
forgings, flanges
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Deli
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery status... |
0 (#0) |
50 |
2011.10.22 |
|
Cast and Forged
|
blind flanges, open die forgings
BLIND FLANGES are used to blank off the ends of piping, valves and pressure vessel opening. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger s
BLIND FLANGES are used to blank off the ends of piping, valves and pressure vessel opening. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes,... |
0 (#0) |
62 |
2011.10.22 |
|
Cast and Forged
|
welding neck flanges, free forgings
WELDING NECK FLANGES are attached by butt welding to the pipe or shell. They are preferred when radiography is required, and provide optimum stress distribution. The long tapered hub provides an
WELDING NECK FLANGES are attached by butt welding to the pipe or shell. They are preferred when radiography is required, and provide optimum stress distribution. The long tapered hub provides an impo... |
0 (#0) |
48 |
2011.10.22 |
|
Cast and Forged
|
slip on flanges, forgings, open die forgings
SLIP-ON FLANGES slide over the pipe and are attached by two fillet welds. They are prefered by many users over welding necks on account of their initially lower cost and ease of alignment. Their
SLIP-ON FLANGES slide over the pipe and are attached by two fillet welds. They are prefered by many users over welding necks on account of their initially lower cost and ease of alignment. Their calc... |
0 (#0) |
52 |
2011.10.22 |
|
Cast and Forged
|
flanges, forgings, open die forgings
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Deli
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery status... |
0 (#0) |
45 |
2011.10.22 |
|
Cast and Forged
|
forged flanges, open die forging
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery statu... |
0 (#0) |
60 |
2011.10.22 |
|
Cast and Forged
|
planetary frame, open die forging
steel forgings:special shape forgings, planetary frame
material:GS52, GS34CrMo4, 4130,4140,or according to customer's material specification
forging equipment: forging
Forgings: flange;
Material:GS52, GS34CrMo4,4130,4140,stainless steel or according to customers material specification;
Forging press:hydraulic forging hammer ;
Delivery statu... |
0 (#0) |
53 |
2011.10.22 |
|
Cast and Forged
|
water pump, investment casting, precision casting
precision casting:investment casting
material: stainless steel, low alloy steel, carbon steel
delivery status: after finished final machining
weight: 0.3kg-30kg
c
precision casting:investment casting
material: stainless steel, low alloy steel, carbon steel
delivery status: after finished final machining
weight: 0.3kg-30kg
casting pr... |
0 (#0) |
43 |
2011.10.22 |
|
Cast and Forged
|
precision casting, lost wax casting, investment casting
precision casting:investment casting, lost wax casting
material: stainless steel, low alloy steel, carbon steel, non-ferrous steel
delivery status: after finished final machining
precision casting:investment casting, lost wax casting
material: stainless steel, low alloy steel, carbon steel, non-ferrous steel
delivery status: after finished final machining
... |
0 (#0) |
55 |
2011.10.22 |
|
Cast and Forged
|
lost wax casting, investment casting
precision casting:investment casting
material: stainless steel, low alloy steel, carbon steel
delivery status: after finished final machining
weight: 0.3kg-30kg
precision casting:investment casting
material: stainless steel, low alloy steel, carbon steel
delivery status: after finished final machining
weight: 0.3kg-30kg
... |
0 (#0) |
51 |
2011.10.22 |
|
Cast and Forged
|
investment casting, lost wax casting
precision casting: investment casting
moulding method: lost wax moulding
pattern: aluminium pattern
weight :2kg - 30kgs
material: GS52 GSCrMo4 4130, non-fer
precision casting: investment casting
moulding method: lost wax moulding
pattern: aluminium pattern
weight :2kg - 30kgs
material: GS52 GSCrMo4 4130, non-ferrous castings ... |
0 (#0) |
42 |
2011.10.22 |
|
Cast and Forged
|
volute, grey iron casting
grey iron castings:volute
material:GG20,GG25,GG30,or according to customer's material specification
moulding method:furan resin sand and semi-automatic moulding
melti
precision casting: investment casting
moulding method: lost wax moulding
pattern: aluminium pattern
weight :2kg - 30kgs
material: GS52 GSCrMo4 4130, non-ferrous castings ... |
0 (#0) |
48 |
2011.10.22 |
|
Cast and Forged
|
grey iron casting, impeller wheel
grey iron castings:impeller wheel
material:GG-20,GG-25,GG-30 or according to customer's material specification
weight:100kg-2tons.
moulding way: furan resin sand and
precision casting: investment casting
moulding method: lost wax moulding
pattern: aluminium pattern
weight :2kg - 30kgs
material: GS52 GSCrMo4 4130, non-ferrous castings ... |
0 (#0) |
41 |
2011.10.22 |
|
Cast and Forged
|
water pump, grey iron casting
pump--grey cast iron ,
The material is GG25, GG30 ,
Moulding method :furan resin sand and semi-automatic moulding ,
Melting method:cupola and intermediate frequency furna
pump--grey cast iron ,
The material is GG25, GG30 ,
Moulding method :furan resin sand and semi-automatic moulding ,
Melting method:cupola and intermediate frequency furnace .
| 0 (#0) |
46 |
2011.10.22 |
|
Trademetro.net Trade Leads / Machinery and Equipment / Industrial Supplies / Cast and Forged