Type:

Type1.Stabilizer forging.
Type2.Integral Blade Stabilizer（divided into third kind as follow）
　　　　　1.Integral spiral stabilizer
　　　　　2.Interchangeable sleeve stabilizer
　　　　　3.Straight blade stabilize

All of the connections are strictly in accordance with API Standard, which have stress relief groove and are cold rolled. The flank of thread is phosphatize plated copper, coated with thread dope and equipped with thread protector. It is mainly the spiral baldes(usually three blades, also can be four blades will according to customers? requirements), which rub against the borehole wall. The working surface of the blade is hard faced. It is preferred operation that tungsten carbide inserts are cold inset into the working surface of blades including its bevels. Braze welding tungsten carbide grains are also adopted according to customers? requirements.

Inquiry and order should specify:

1. Hole size and type of stabilizer( string or near bits)
   
2. OD and ID
   
3. Connections type and size
   
4. API stress relief groove
   
5. Open or tight design
   
6. Right or left hand spiral
   
7. Hard facing type
   
8. Float valve and hole

Output: 500pcs per month.

Size: The max. OD of stabilizer is 36?. Both stabilizer forging and integral blade stabilizer.

Advertisements