Description

SNF-5 is a Sodium Naphthalene Formaldehyde. This product is made by industrial Naphthalene, Beta-sulphonate, Formaldehyde and Alkali via sulphuration, hydrolyzation, condensation and neutralization reactions. It belongs to non-air-entraining superplasticizer. SNF-5 is non-poisonous, odorless, non-flammable and non-corrosive to steel bars.

SNF-5 meets the requirements of the PRC's Standardization of concrete admixture of GB8076-1997 and GB50119-2003.

Features, Properties & Characteristics

Performance Test, (Dosage, Cement×0.6％)

Dosage, Benefits and Application

1.    Dosage rates vary depending upon the cement chemistry, amount of plasticity and/or water reduction desired. Recommended dosage range for SNF-5 is 0.5～1.0％ of cement. It is highly recommended that trial mixes be prepared to determine the optimum dosage for your specific performance requirements. When dosage is 0.6％ of cement, The rate of water reducing is 20～30％.

2.    Keeps the same strength, cement saving reaches to 19-20%.

3.    The slump increases over 10cm, after dosage 0.6% (powder or equal).

4.    Increased workability, durability, impermeability and place ability.

5.    Increased strength at all ages.

6.    Good compatibility with wide ranges of cements like Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc

7.    SNF-5 is recommended for use in all types of concrete including high strength, early strength, precast, pretressed, flowable and self-consolidating concrete. 

8.    SNF-5 is applied to roads, bridges, tunnels, hydraulic electricity engineering, ports, high buildings etc.

Package, Storage & Handling

1.    For powder, woven fabric bag with plastic liner. Net weight: 40kg +/- 0.2 kg or 25±0.2kg，or according to customer’s requirements.

2.    Cautions should be taken to prevent from being torn by sharp-ended objects while packages are being transferred or delivered. When being contaminated by high humidity or moisture in case of leakage, it can be prepared in prescribed ways for further use without surrendering any effect.

3.     It should be stored in a dedicated warehouse that is well-ventilated and dry. It remains effective in one year. After the expiration, date, it can be used again if testing results fall within the established range.

Technical Service

A trained representative is available to assist in the preparation of specifications, and the resolution of concrete problems in the field.

Advertisements