|
ADS3P01 is a portable, high quality PON optical power meter. It is specifically designed to meet the rapid growth of FTTx market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. ADS3P01 can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make ADS3P01 becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.
Features:
l Cost efficient palm size designed for field and lab testing
l Support P/F measurement and normal measurement
l Easy-to-use interface with large color TFT display for easy visibility and LED indicators.
lSimply connect-and-display the results of all three wavelengths (1310/1490/1550nm) of PON signals with two optical ports
l Detect and measure the upstream burst at 1310nm
l Support APON, BPON, EPON and GPON networks
l Pass, Fail and Warning indicators for easy view of signal condition
l User definable threshold value (up to 10 sets)
l Auto power shut off
l Low battery warning
l USB interface
l Real-time clock.
Unit runs either by Ni-MH battery for more than 20 hours continuously work or AC/DC adapter.
Technical Specifications
Model
|
ADS3P01
|
Calibrated Wavelength
|
1310nm
|
1490nm
|
1550nm
|
Measuring Range( continuous datastream) (dBm)
|
-40 to +10
|
-50 to +15
|
-50 to +20
|
Burst signal measuring range( 1310nm ) (dBm)
|
-32 to +10
|
Spectral Pass-band (nm)
|
1260 ~ 1360
|
1480 ~ 1500
|
1539 ~ 1565
|
Connector Type
|
Interchangeable FC, SC and ST
|
Detector Type
|
InGaAs
|
Insertion loss
|
1.5dB
|
Accuracy
|
± 0.5dB
|
Linearity
|
± 0.2dB
|
Interfaces
|
2 ports: one for 1310nm (ONU) and one for 1490nm/1550nm (OLT)
|
Communication port
|
USB
|
Data Storage
|
1000 sets
|
Auto Power Off
|
Yes
|
Back-light
|
Yes
|
Refresh Rate of Display
|
2.5Hz
|
Threshold Value
|
10 sets (configured via PC-based software)
|
General Specifications:
Operating Temperature
|
-10 ~ +50°C
|
Storage Temperature
|
-20 ~ +70°C
|
Relative Humidity
|
0% ~ 95% (non-condensing)
|
Power Supply
|
4 pcs 1.2V Ni-MH AA, 6V AC/DC Adaptor
|
Batter life
|
> 20 hours on typical measurement
|
Dimension (mm) with rubber boot on
|
190L x 105W x 55H
|
Display
|
2.8 inch TFT Color LCD
|
Net Weight
|
700g
|
|
|
|
|
|
|
|
| Posted by |
Murphy Yeung
|
| e-Mail | Contact company |
Company
| Adysun Optical Fiber Communication Co., Lt
| | Address | Zhenye Building 2014 Bao'an Road South | City & ZIP
| Shenzhen,518001
| Country
| China 
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | | | Company Profile | Our products include Optical Power Meter, Optical Laser Source, Fusion Splicer, OTDR, Optical Attenuator, Optical Loss Test Sets, Visual Fault Locator, Optical Fiber Identifier, Communication Line Tester, Data Transmission Testing, Resistance Testing, Battery Testing and Maintenance Equipment, Optical Fiber Tool Kit, Optical Cleaning Products etc. More detail please kindly visit our website www.adysunfiber.com | | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | PON Power Meter ADS3P01 | | Product Specifications | ADS3P01 is a portable, high quality PON optical power meter. It is specifically designed to meet the rapid growth of FTTx market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. ADS3P01 can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make ADS3P01 becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.
Features:
Cost efficient palm size designed for field and lab testing
Support P/F measurement and normal measurement
Easy-to-use interface with large color TFT display for easy visibility and LED indicators.
Simply connect-and-display the results of all three wavelengths (1310/1490/1550nm) of PON signals with two optical ports
Detect and measure the upstream burst at 1310nm
Support APON, BPON, EPON and GPON networks
Pass, Fail and Warning indicators for easy view of signal condition
User definable threshold value (up to 10 sets)
Auto power shut off
Low battery warning
USB interface
Real-time clock.
Unit runs either by Ni-MH battery for more than 20 hours continuously work or AC/DC adapter.
| | Industry Category | optic fiber equipment | | Quality/Safety Certifications | | | Delivery Lead Time | 10days | | Payment & Price Terms | T/T | | My Offers | PON Power Meter ADS3P01 | | Product Portfolio / Other Products | Optical Power Meter, Optical Laser Source, Fusion Splicer, OTDR, Optical Attenuator, Optical Loss Test Sets, Visual Fault Locator, Optical Fiber Identifier, Communication Line Tester, Data Transmission Testing, Resistance Testing, Battery Testing and Maintenance Equipment, Optical Fiber Tool Kit, Optical Cleaning Products etc. | | Customers | all over the world | | Detailed Company Introduction | | | FOB Price & Port | USD3000.000 | | Packaging Details | 10 | | Our Team | 10 | | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
252660 |
| Visits |
103 |
| Date |
2010.05.19 |
|
|
|  |
|
|
Trademetro.net Trade Leads / Electrical Equipment & Supplies / Security & Protection / Tools, Equipment, Domestic Appliances
Company Profile
Contact
TradeMetro.net Member Login
