GSM GPRS RTU Telemetry Data Logger

The King Pigeon S Serial GSM GPRS RTU Telemetry Data Logger equipped Siemens MC55i quad-band GPRS Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.

Features:

• 
  Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit  MCU inside;


• 
  Direct connection to the GSM GPRS Network;


• 
  Transparent Serial Data Tunneling using low cost SMS/GPRS network;


• 
  Remote Configuration by SMS Messages or GPRS;


• 
  Upload data via GPRS or SMS on Schedule or event occurs;


• 
  Supports Dynamic Domain name or Static IP address;


• 
  Supports SMS, GPRS UDP and TCP protocols;


• 
  Supports Modbus RTU protocols;


• 
  1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port;


• 
  6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;


• 
  6 digital inputs can be used as Pulse Counters;


• 
  4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;


• 
  10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA);


• 
  2 Thermometer Inputs for DS18B20, measures temperatures from -55°C to +125°C. Fahrenheit equivalent is -67°F to +257°F, ±0.5°C accuracy from -10°C to +85°C, Thermometer resolution is programmable from 9 to 12 bits;


• 
  4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA;


• 
  Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name;


• 
  MTBF(Mean Time Between Failure) up to 2Years;


• 
  User friendly PC Programming Interface, it can remotely program the terminals as well as to   upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;


• 
  More Protocols can be updated by user through USB Port with the updated firmware;


• 
  Power supply 9V to 24V(Recommend 12VDC).

Specifications of GPRS RTU:

Standard Package list:

GSM/GPRS RTU X 1

Power supply adapter X 1 (12V 1.5A 1)

USB cable for communication X 1

CD (PC Configurator and User Manual) X 1

GSM Antenna X 1

Monitoring Center or OPC Server or SCADA:

1. 
    Directly to SCADA System

If the users want to log data to its present SCADA system directly, the user must develop the GSM/GPRS Driver then install in its present SCADA according to our communication protocols. The topological graph please see below:

2. 
   Monitoring by SCADA System through OPC Server

If the users want to log data to its present SCADA system through OPC Server, the user must develop the GSM/GPRS Driver then install in its present OPC Server according to our communication protocols, so that the OPC Clients can access the GSM/GPRS RTU through OPC Server. The topological graph please see below:

3. 
   By customer customization monitoring center

If the users want to log data to its customization monitoring center, the user must develop the GSM/GPRS Driver then install in its monitoring center software according to our communication protocols. The topological graph please see below:

4. 
   By Mobile phone through SMS.

The GSM/GPRS RTU can send the reports and events by SMS to 1 SMS Center number and 6 user numbers.

Advertisements