|
The Far Infrared (FIR) Sauna Wrap PH-2BIII is a low-voltage FIR device, with 3 separately controlled heating zones, suitable for professional use at a spa, weight loss center or beauty salon.
INFRARED (FIR) SAUNA WRAP COMPOSITION AND FUNCTIONS:
Features and Advantages
36V/300W Low output voltage
By turning AC high voltage power into 36V DC voltage, it is absolutely safe for users without any risk of burning or electric shock.
3- Channel precise temperature control
Enable you to control and adjust the temperature (30℃~60℃) and working time (5~95 minutes) for 3 different parts of your body including belly and lower part of the body.
Made of high-efficiency heating element.
The heating element is made of carbon wire that can produce much more heat than ordinary metal wire. Besides, carbon wire is light, durable and foldable and uneasy to break. ,what is more ,the carbon firber wire can produce Far Infrared Ray .
The cover is made of PU that is soft, comfortable, easy to clean and store.
Benefits
Marvelous slimming effect
Good slimming effect. Combined with slimming elite oil and our slimming diet, one of our customers in Germany lost more than 30 kgs of weight and in several months and became a healthy, slim and beautiful women.
Good effect for skin care
By coating your body with a layer of dead mud sea and then covering your body with our blanket, the heat eradiated by the heating element will help your skin to absorb the elite oil in the mud and clean the skin. Therefore, it is specially suitable for beauty solon and body-shaping centers.
3. Strong therapy effect
By absorbing the energy eradiated by Far Infrared Ray, it will promote the blood circulation in your body and therefore accelerate the metabolism in your body, discharge toxic element, alleviate pain, eliminating inflammation, relieve pressure and promote deep sleeping. Specially good for office clerk, elder person or weak person etc.
|
|
|
|
|
|
|
| Posted by |
rubinahuang
|
| e-Mail | Contact company |
Company
| Shenzhen Anpan Technology Co., Ltd
| | Address | No. 44, 2ND RD., Xiakeng, Tongle Community | City & ZIP
| shenzhen 518116
| Country
| China 
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | | | Company Profile | Shenzhen Anpan Technology Co., Ltd is a big manufacturer specializing in R&D and manufacturing Far Infrared Technology / Far Infrared Therapy Heating Health Care Products in China, which is benefical to the both parties between the buyer and seller.
Shenzhen Anpan Technology Co., Ltd was established with her comprehensive FIR technology products(OEM & ODM of Far Infrared Health Care products) in Shenzhen, China. We started our business with customers abroad in 2003 and have been successfully conducted both import and export business world wide for many years. Our CEO, Mr. Yuehong Pan with our experienced R&D engineers have been engaged in Far Infrared Technology more than two decades. Based on our rich experience of R&D, Marketing, Sales & Service department, we have the strong ability to meet the increasing global demands of the markets. Till now, most of products have attained CE, GS, UL, ETL and PSE certification and have been sold to more than 64 countries and regions including North America, South America, Europe, Middle East, South Africa, East Asia, Southeast Asia etc.
| | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | Far infrared slimming blanket | | Product Specifications | INFRARED (FIR) SAUNA WRAP PH-2BIII INSTRUCTIONS:
1. Place the Far Infrared Sauna Wrap on a flat surface, such as the bed or floor.
2. Wrap your body in the blanket. If a massage or body oil is used, then it is recommended to first wrap the body in a plastic film or sheet to protect the thermal blanket.
3. Put the control box on a flat surface such as a table and insert the plug into the main power socket.
4. Connect the 3 connection leads between the thermal blanket and the control box. Make sure that lead "1" is connected to jack "1", lead "?2" to jack "2", etc. or the thermal blanket will not work.
5. Turn the main power switch on at the back of the control box. The red ?Power? indicator on the control panel will light. The device has not started working yet.
6. Press the "ON/OFF" key to start setting the temperature and the timer. The Channel key shows"1" (body zone 1).
7. Press Timer to set the working time. For each time pressed, the time will increase or decrease by 5 minutes.
8. Press Temperature to set the working temperature. For each time pressed, the temperature will increase or decrease by 1? Centigrade. Set the temperature to your specific requirements.
9. Then press ?Heating Zone? key to change the zones. Repeat steps 6, 7, and 8 to set and start body zones 2 and 3.
Zone 1: Upper body and limbs (suggested temperature 38? C)
Zone 2: Mid body (suggested temperature 44? C)
Zone 3: Lower body and limbs (suggested temperature 42? C)
10. Press "Start/Stop" key. The green indicator will light, showing that heating has started.
11. When the heating timer counts down to "?0", a signal will sound three times and the digital timer will display "0" showing the heating has finished.
12. After using, pull the plug out from the power source.
13. If at any time you need to stop the session, just press the ?Start/Stop? key. When the green indicator goes off, the system has stopped working.
14. Wipe the sweat from the surface of the thermal blanket with a wet towel and dry it by laying it flat on a bed or table for more than 1 hour.
15. Fold the blanket and store it in a dry and cool place.
16. For professional use at spa, weight loss center or beauty salon, wipe surface of the thermal blanket as above, and leave an interval between customer sessions of at least 1/2 hour, preferably 1 hour.
SUGGESTED USE:
1. When the room temperature is lower than 20?C you may preheat the blanket for 10 minutes prior to use.
2. It is suggested that you be well hydrated by drinking a glass of water prior to using.
| | Industry Category | weight loss | | Quality/Safety Certifications | | | Delivery Lead Time | 7-15days | | Payment & Price Terms | T/T.PAYPAL ETC | | My Offers | Sample: 1-3pcs 350USD/pcs
MOQ: 100pcs 210USD/pcs | | Product Portfolio / Other Products | | | Customers | worldwide | | Detailed Company Introduction | Shenzhen Anpan Technology Co., Ltd is a big manufacturer specializing in R&D and manufacturing Far Infrared Technology / Far Infrared Therapy Heating Health Care Products in China, which is benefical to the both parties between the buyer and seller.
Shenzhen Anpan Technology Co., Ltd was established with her comprehensive FIR technology products(OEM & ODM of Far Infrared Health Care products) in Shenzhen, China. We started our business with customers abroad in 2003 and have been successfully conducted both import and export business world wide for many years. Our CEO, Mr. Yuehong Pan with our experienced R&D engineers have been engaged in Far Infrared Technology more than two decades. Based on our rich experience of R&D, Marketing, Sales & Service department, we have the strong ability to meet the increasing global demands of the markets. Till now, most of products have attained CE, GS, UL, ETL and PSE certification and have been sold to more than 64 countries and regions including North America, South America, Europe, Middle East, South Africa, East Asia, Southeast Asia etc.
We put decade of expertise and advanced far infrared technology into the orders with the know-how intelligent tech. Any new idea and requirements are welcomed.
Our line of products including
Beauty Care Products - Professional slimming & body shaping thermal treating equipments
Healthcare Products - Home & personal therapeutic heating devices & appliances
Sports & Outdoors Supplies - Hot food delivery, portable outdoor sports equipments & sports injuries treatment wraps & pads
Winter Gears & Equipments - Heated clothing & equipments
Veterinary Care Products - Therapeutic heating blanket & wraps for animals & pets
Other Specialized Field - Daily heated products for dedicated industries | | FOB Price & Port | FOB SHENZHEN PORT | | Packaging Details | 3pcs in one box | | Our Team | rubina | | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
316113 |
| Visits |
81 |
| Date |
2012.01.14 |
|
|
|  |
|
|
Trademetro.net Trade Leads / Medical, Health & Beauty / Weight Loss
Company Profile
Contact
TradeMetro.net Member Login
