|
DEAR SIR / MADAM,
We are Manufacturer & Exporter on OEM terms Below Listed Products :
1) EARTHING CLAMP AS PER BS 951 AS UNDER : --
A ) REGULAR RUNNING MODEL EARTHING CLAMP BS 951 : -
EC 14-1, 15-1 & 16-1 APPLICABLE TO DIA 12-32MM
EC 14-2, 15-2 & 16-2 APPLICABLE TO DIA 32-50MM
EC 14-3, 15-3 & 16-3 APPLICABLE TO DIA 50-75MM
SERIES : 14 SERIES IS SUITABLE FOR CLEAN DRY ATMOSPHERE & 15 & 16 SERIES ARE SUITABLE FOR ALL ENVIRONMENTS.
TERMINAL SIZE : A-D IS MENT FOR 2.5MM2 TO 10MM2 CONDUCTOR & A-E IS MENT FOR 2.5MM2 TO 16MM2 CONDUCTOR. ( ADAPTED TO CONDUCTOR SIZES UPTO 50MM2 )
CUSTOMISED CLAMPS & LARGE BENDS AVAILABLE AS PER DRAWINGS OR SAMPLES OR AS PER PIPE DIA.
B ) TENBY TYPE EARTHING OR RAPID CLAMP BS 951 : -
EARTHING CLAMP EC 14, 15 TENBY TYPE
C ) PHILEX TYPE RADIATOR EARTH CLAMP A PACK OF 10 PCS INCLUSIVE OF SPANNER.
2) SPLIT BOLT CONNECTOR OR LINE TAP MADE FROM BRASS
AVAILABLE 10MM2 TO 500MM2, FULL TIN PLATED OR RED COPPER PLATED OR WITHOUT ANY PLATING. TYPE : HEX OR
RECTANGULAR OR SQUARE TYPE HEAD OR CUSTOMISED AS PER DRAWINGS OR SAMPLE.
SPLIT BOLT CONNECTORS ARE AVAILABLE IN MM2, KSU & KS, SOL / STR SERIES WITH / WITHOUT SPACER.
3) FURSE TYPE QUALITY EARTHING & GROUNDING ACCESORIES MANUFACTURED FROM BRASS OR GUNMETAL OR BRONZE & AS PER CUSTOMERS DRAWING : -
BRASS TERMINAL BLOCK ( I & H OR CUSTOMISED AS PER DRAWING), TERMINAL CONNECTOR, AERIAL ROD, MULTIPLE POINT, TERMINAL BASE, B BOND, C TYPE CONNECTOR, CLAMP A TYPE FOR ROD DIA 12 MM, CLAMP B TYPE ROD TO TAPE, CLAMP C TYPE FOR ROD TO CABLE LUG, CLAMP C TYPE FOR ROD TO CABLE, CLAMP FOR CABLE WITH 2 BOLT, PARALLEL CLAMP WITH 2 BOLT, COUPLER, DCTAPE CLIP, EARTH PLATE 2 HOLE, EARTH PLATE 4 HOLE, JOINTING CLAMP, LUG WITH 2 BOLT, LUG U BOLT TYPE, OBLONG TEST CLAMP, POLE TYPE TERMINAL, RAIN WATER PIPE BOND, SCREW DOWN TEST CLAMP, SQUARE TAPE CLAMP, TAPE/ ROD CLAMP, TEE CLAMP, TERMINAL BASE HEAVY, TEST BOND TEST CLAMP, TINNED SCREW SLEEVES, TOWER BOND CLAMP, U BOLT LUG CLAMP, U BOLT ROD CLAMP, U BOLT ROD TO CABLE CLAMP DIFFERENT MODELS, COPPERBONDED EARTHING ROD / PLATES & HOT DIP GALVANISED EARTHING RODS / PLATES
4)
-- CRIMPING TYPE COPPER TUBULAR CABLE TERMINAL END MATERIAL E COPPER & ELECTRO TINNED.
FROM 1.5MM TO 1000MM & AS PER CUSTOMERS REQUIREMENT OR DRAWING.
-- COPPER FERRULES MATERIAL E-COPPER BS-1977 & ELECTRO TINNED FINISH.
5) FLEXIBLE COPPER BRAIDS, STRANDS & CONNECTORS STANDARD & CUSTOMISED SERIE AVAILABLE :-
ROUND STRANDED COPPER FLEXIBLES : 0.1MM2 TO 600MM2
BRAIDED COPPER TAPES, FLAT ROLLED : 0.09MM2 TO 400MM2
ROUNDED BRAIDED COPPER FLEXIBLES : 0.047MM2 TO 70MM2
SQUARE BRAIDED COPPER FLEXIBELS : 0.50MM2 TO 70MM2
FLAT BRAIDED COPPER FLEXIBLE CONNECTORS : 1MM2 TO 4000MM2
ROUND STRANDED COPPER FLEXIBLE CONNECTORS : 1MM2 TO 1000MM2
BUSBAR FLEXIBLE CONNECTORS : 1MM2 TO 4000MM2.
RESISTANCE WELDED COPPER FLEXIBLES & WELDED CONNECTORS : 0.25MM2 TO 20MM2
ROUND STRANDED COPPER FLEXIBLE WITH OVERALL BRAIDING : 0.35MM2 TO 120MM2
LAMINATED COPPER FLEXIBLE CONNECTORS : CUSTOMISED / AS PER YOUR REQUIREMENT.
ABOVE PRODUCTS AVAILABLE IN BARE COPPER / TINNED / SILVER PLATED FINISH IN ELECTROLYTIC / OXYGEN FREE GRADE OF COPPER.
6) PRE GALVANISED OR G.I. SWITCH SOCKET BOXES :-- ( THIS PRODUCT IS UNDER DEVELOPMENT YOU CAN SPECIFY OF YOUR SIZE OR IF POSSIBLE YOU CAN US DRAWING SO WE CAN DEVELOP THE SAME AS PER YOUR REQUIREMENT & CAN SUPPLY YOU ON OEM TERMS )
3 X 3, 3 X 6 & CUSTOMISED AS PER DRAWING,
SURFACE BOXES : -
3 X 3 & 3 X 6 & CUSTOMISED AS PER DRAWING.
OEM SUPPLY : AVAILABLE
ODM SUPPLY : AVAILABLE
WE ARE AT YOUR SERVICE 24 X 365.
RGDS,
SANJAY RAICHURA
|
|
|
|
|
|
|
| Posted by |
Sanjay Raichura
|
| e-Mail | Contact company |
Company
| Vinod Group of Ind Estd : 1952
| | Address | B/32 Gidc Ph 1, | City & ZIP
| Jamnagar - 361004
| Country
| India 
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | | | Company Profile | DEAR SIR / MADAM,
We are Manufacturer & Exporter on OEM terms Below Listed Products :
1) EARTHING CLAMP AS PER BS 951 AS UNDER : --
A ) REGULAR RUNNING MODEL EARTHING CLAMP BS 951 : -
EC 14-1, 15-1 & 16-1 APPLICABLE TO DIA 12-32MM
EC 14-2, 15-2 & 16-2 APPLICABLE TO DIA 32-50MM
EC 14-3, 15-3 & 16-3 APPLICABLE TO DIA 50-75MM
SERIES : 14 SERIES IS SUITABLE FOR CLEAN DRY ATMOSPHERE & 15 & 16 SERIES ARE SUITABLE FOR ALL ENVIRONMENTS.
TERMINAL SIZE : A-D IS MENT FOR 2.5MM2 TO 10MM2 CONDUCTOR & A-E IS MENT FOR 2.5MM2 TO 16MM2 CONDUCTOR. ( ADAPTED TO CONDUCTOR SIZES UPTO 50MM2 )
CUSTOMISED CLAMPS & LARGE BENDS AVAILABLE AS PER DRAWINGS OR SAMPLES OR AS PER PIPE DIA.
B ) TENBY TYPE EARTHING OR RAPID CLAMP BS 951 : -
EARTHING CLAMP EC 14, 15 TENBY TYPE
C ) PHILEX TYPE RADIATOR EARTH CLAMP A PACK OF 10 PCS INCLUSIVE OF SPANNER.
2) SPLIT BOLT CONNECTOR OR LINE TAP MADE FROM BRASS
AVAILABLE 10MM2 TO 500MM2, FULL TIN PLATED OR RED COPPER PLATED OR WITHOUT ANY PLATING. TYPE : HEX OR
RECTANGULAR OR SQUARE TYPE HEAD OR CUSTOMISED AS PER DRAWINGS OR SAMPLE.
SPLIT BOLT CONNECTORS ARE AVAILABLE IN MM2, KSU & KS, SOL / STR SERIES WITH / WITHOUT SPACER.
3) FURSE TYPE QUALITY EARTHING & GROUNDING ACCESORIES MANUFACTURED FROM BRASS OR GUNMETAL OR BRONZE & AS PER CUSTOMERS DRAWING : -
BRASS TERMINAL BLOCK ( I & H OR CUSTOMISED AS PER DRAWING), TERMINAL CONNECTOR, AERIAL ROD, MULTIPLE POINT, TERMINAL BASE, B BOND, C TYPE CONNECTOR, CLAMP A TYPE FOR ROD DIA 12 MM, CLAMP B TYPE ROD TO TAPE, CLAMP C TYPE FOR ROD TO CABLE LUG, CLAMP C TYPE FOR ROD TO CABLE, CLAMP FOR CABLE WITH 2 BOLT, PARALLEL CLAMP WITH 2 BOLT, COUPLER, DCTAPE CLIP, EARTH PLATE 2 HOLE, EARTH PLATE 4 HOLE, JOINTING CLAMP, LUG WITH 2 BOLT, LUG U BOLT TYPE, OBLONG TEST CLAMP, POLE TYPE TERMINAL, RAIN WATER PIPE BOND, SCREW DOWN TEST CLAMP, SQUARE TAPE CLAMP, TAPE/ ROD CLAMP, TEE CLAMP, TERMINAL BASE HEAVY, TEST BOND TEST CLAMP, TINNED SCREW SLEEVES, TOWER BOND CLAMP, U BOLT LUG CLAMP, U BOLT ROD CLAMP, U BOLT ROD TO CABLE CLAMP DIFFERENT MODELS, COPPERBONDED EARTHING ROD / PLATES & HOT DIP GALVANISED EARTHING RODS / PLATES
4)
-- CRIMPING TYPE COPPER TUBULAR CABLE TERMINAL END MATERIAL E COPPER & ELECTRO TINNED.
FROM 1.5MM TO 1000MM & AS PER CUSTOMERS REQUIREMENT OR DRAWING.
-- COPPER FERRULES MATERIAL E-COPPER BS-1977 & ELECTRO TINNED FINISH.
5) FLEXIBLE COPPER BRAIDS, STRANDS & CONNECTORS STANDARD & CUSTOMISED SERIE AVAILABLE :-
ROUND STRANDED COPPER FLEXIBLES : 0.1MM2 TO 600MM2
BRAIDED COPPER TAPES, FLAT ROLLED : 0.09MM2 TO 400MM2
ROUNDED BRAIDED COPPER FLEXIBLES : 0.047MM2 TO 70MM2
SQUARE BRAIDED COPPER FLEXIBELS : 0.50MM2 TO 70MM2
FLAT BRAIDED COPPER FLEXIBLE CONNECTORS : 1MM2 TO 4000MM2
ROUND STRANDED COPPER FLEXIBLE CONNECTORS : 1MM2 TO 1000MM2
BUSBAR FLEXIBLE CONNECTORS : 1MM2 TO 4000MM2.
RESISTANCE WELDED COPPER FLEXIBLES & WELDED CONNECTORS : 0.25MM2 TO 20MM2
ROUND STRANDED COPPER FLEXIBLE WITH OVERALL BRAIDING : 0.35MM2 TO 120MM2
LAMINATED COPPER FLEXIBLE CONNECTORS : CUSTOMISED / AS PER YOUR REQUIREMENT.
ABOVE PRODUCTS AVAILABLE IN BARE COPPER / TINNED / SILVER PLATED FINISH IN ELECTROLYTIC / OXYGEN FREE GRADE OF COPPER.
6) PRE GALVANISED OR G.I. SWITCH SOCKET BOXES :-- ( THIS PRODUCT IS UNDER DEVELOPMENT YOU CAN SPECIFY OF YOUR SIZE OR IF POSSIBLE YOU CAN US DRAWING SO WE CAN DEVELOP THE SAME AS PER YOUR REQUIREMENT & CAN SUPPLY YOU ON OEM TERMS )
3 X 3, 3 X 6 & CUSTOMISED AS PER DRAWING,
SURFACE BOXES : -
3 X 3 & 3 X 6 & CUSTOMISED AS PER DRAWING.
OEM SUPPLY : AVAILABLE
ODM SUPPLY : AVAILABLE
WE ARE AT YOUR SERVICE 24 X 365.
RGDS,
SANJAY RAICHURA
FAX : +91-288-2561652
CELL: +91-9377719921
EMAIL: vinodindia@satyam.net.in
www.vinodgroup.in
WE ARE CUSTOMISED MANUFACTURER OF SHEET METAL PRODUCTS & BRASS COPPER ALLOY PRODUCTS AS PER DRAWINGS OR SAMPLES.
| | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | earthing | | Product Specifications | Brass copper alloy electrical, earthing, grouding products, Earthing Clip bs 951 Ec 14,15,16, Tenby type Rapid clamp, Philex type radiator earth clamp, split bolt connector, line tap, furse type earthing & grounding accesories made from Brass, naval Brass, Gun Metal, Al Bronze & Ph. Bronze. | | Industry Category | Brass copper alloy electrical | | Quality/Safety Certifications | ISO & British Standards | | Delivery Lead Time | 4 Weeks | | Payment & Price Terms | l/c or tt | | My Offers | Sales | | Product Portfolio / Other Products | | | Customers | WORLDWIDE | | Detailed Company Introduction | Company Establised in 1952 & today we are one of the largest manufacturer, exporter & oem supplies of Customised Sheet metal & brass copper alloy products.
| | FOB Price & Port | 11111111 | | Packaging Details | 76 | | Our Team | Sanjay Raichura | | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
209615 |
| Visits |
1277 |
| Date |
2008.02.27 |
|
|
|  |
|
| |
|
|
|
Trademetro.net Trade Leads / Electrical Equipment & Supplies / Security & Protection / Wires, Cables, Cable Assemblies
Company Profile
Contact
TradeMetro.net Member Login
