|
ALANITE GA Series Thermostable Ink
Ⅰ、Description
ALANITE GA series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. Excellent adhesion. Chemical resistance, boiling and alcohol resistant. High gloss. Light fastness.
Ⅱ、Recommended Application
◆ Recommended substrate: Metal plates. Glass. Stainless Steel. Chinaware. Porcelain enamel. Etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）.
Mesh count: 70T to 180T
Drying: Heat cure at 200℃-650℃in about 30 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover before heat cure, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALANITE GA Series Inks)
Substrate
|
Printing Inks
|
Remark
|
Glass
|
ALANITE GA-223
|
300OC heat cure in 40 minute,
Then more than three hour later, about 25OC
|
2, Test Result of the Film (ALANITE GA Series Inks)
Item
|
Test Method
|
Result
|
Adhesive Force
|
Cross cut, Peeling test with adhesive tape
|
100/100 Pass
|
Rigidity
|
Angle 45O, 1200g, Pencil hardness
|
2H-3H
|
Water Resistance
|
Water immersion in five weeks
|
No Effect
|
Acid Resistance
|
Immersion 30% H2SO4 aqueous solution in 10 hours
|
No Effect
|
Alcohol Resistance
|
1200g, Back and forth wipe 100 times with alcohol cloth
|
No Effect
|
Xylene Resistance
|
1000g, Back and forth wipe 50 times with xylene cloth
|
No Effect
|
Gasoline Resistance
|
1000g, Back and forth wipe 50 times with gasoline cloth
|
No Effect
|
Abrasion Resistance
|
500g, Back and forth scrape 500 times with eraser
|
No Effect
|
Weatherability
|
Back printing, Accelerated exposing aging test
|
800 hr.
|
|
|
|
|
|
|
|
| Posted by |
Juen Chan
|
| e-Mail | Contact company |
Company
| Aco.Amen Chemical Technology Ltd.
| | Address | Aco18,Xiaobu,Fenggang,Dongguan,Guangdong | City & ZIP
| 518111
| Country
| China 
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | | | Company Profile | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical additives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the production of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for hardening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument and nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on. Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents. Stains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic rheological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint for metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating equipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for greater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to form a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit communication.
During the development process, AMMEN Imperial Group has gained clients? trust widely, based on his excellent professional ethics, the first-class commercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments. | | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | tap screen ink | | Product Specifications | ALANITE GA Series Thermostable Ink
Ⅰ、Description
ALANITE GA series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. Excellent adhesion. Chemical resistance, boiling and alcohol resistant. High gloss. Light fastness.
Ⅱ、Recommended Application
◆ Recommended substrate: Metal plates. Glass. Stainless Steel. Chinaware. Porcelain enamel. Etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）.
Mesh count: 70T to 180T
Drying: Heat cure at 200℃-650℃in about 30 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover before heat cure, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALANITE GA Series Inks)
Substrate Printing Inks Remark
Glass ALANITE GA-223 300OC heat cure in 40 minute,
Then more than three hour later, about 25OC
2, Test Result of the Film (ALANITE GA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Industry Category | ALANITE GA Series Thermostable Ink | | Quality/Safety Certifications | | | Delivery Lead Time | 2018 | | Payment & Price Terms | TT | | My Offers | ALANITE GA Series Thermostable Ink
Ⅰ、Description
ALANITE GA series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. Excellent adhesion. Chemical resistance, boiling and alcohol resistant. High gloss. Light fastness.
Ⅱ、Recommended Application
◆ Recommended substrate: Metal plates. Glass. Stainless Steel. Chinaware. Porcelain enamel. Etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）.
Mesh count: 70T to 180T
Drying: Heat cure at 200℃-650℃in about 30 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover before heat cure, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALANITE GA Series Inks)
Substrate Printing Inks Remark
Glass ALANITE GA-223 300OC heat cure in 40 minute,
Then more than three hour later, about 25OC
2, Test Result of the Film (ALANITE GA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Product Portfolio / Other Products | ALANITE GA Series Thermostable Ink
Ⅰ、Description
ALANITE GA series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. Excellent adhesion. Chemical resistance, boiling and alcohol resistant. High gloss. Light fastness.
Ⅱ、Recommended Application
◆ Recommended substrate: Metal plates. Glass. Stainless Steel. Chinaware. Porcelain enamel. Etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）.
Mesh count: 70T to 180T
Drying: Heat cure at 200℃-650℃in about 30 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover before heat cure, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALANITE GA Series Inks)
Substrate Printing Inks Remark
Glass ALANITE GA-223 300OC heat cure in 40 minute,
Then more than three hour later, about 25OC
2, Test Result of the Film (ALANITE GA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Customers | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical
ditives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the
oduction of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for
rdening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument
d nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on.
Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents.
ains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic
eological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint
r metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating
uipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for
eater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to
rm a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit
mmunication.
During the development process, AMMEN Imperial Group has gained clients!ˉ trust widely, based on his ecellent professional ethics, the first-class
mmercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments. | | Detailed Company Introduction | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical
ditives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the
oduction of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for
rdening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument
d nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on.
Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents.
ains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic
eological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint
r metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating
uipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for
eater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to
rm a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit
mmunication.
During the development process, AMMEN Imperial Group has gained clients!ˉ trust widely, based on his ecellent professional ethics, the first-class
mmercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments. | | FOB Price & Port | 10000000 | | Packaging Details | 205 | | Our Team | Juen Chan
acoamen@163.com
+86-13923737684 | | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
315062 |
| Visits |
26 |
| Date |
2012.01.06 |
|
|
|  |
|
|
Trademetro.net Trade Leads / Chemical / Coatings
Company Profile
Contact
TradeMetro.net Member Login
