|
ALABINE CA Series Glass Metal Plastic Ink
Ⅰ、Description
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
Ⅱ、Recommended Application
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE CA Series Inks)
Substrate
|
Printing Inks
|
Remark
|
Harden Acrylic Board
|
ALABINE CA-223 + ALATIVE SN10（5:1）
|
70OC heat cure in 45 minute,
Then more than one week later, About 25OC
|
2, Test Result of the Film (ALABINE CA Series Inks)
Item
|
Test Method
|
Result
|
Adhesive Force
|
Cross cut, Peeling test with adhesive tape
|
100/100 Pass
|
Rigidity
|
Angle 45O, 1200g, Pencil hardness
|
2H-3H
|
Water Resistance
|
Water immersion in five weeks
|
No Effect
|
Acid Resistance
|
Immersion 30% H2SO4 aqueous solution in 10 hours
|
No Effect
|
Alcohol Resistance
|
1200g, Back and forth wipe 100 times with alcohol cloth
|
No Effect
|
Xylene Resistance
|
1000g, Back and forth wipe 50 times with xylene cloth
|
No Effect
|
Gasoline Resistance
|
1000g, Back and forth wipe 50 times with gasoline cloth
|
No Effect
|
Abrasion Resistance
|
500g, Back and forth scrape 500 times with eraser
|
No Effect
|
Weatherability
|
Back printing, Accelerated exposing aging test
|
800 hr.
|
|
|
|
|
|
|
|
| Posted by |
Juen Chan
|
| e-Mail | Contact company |
Company
| Aco.Amen Chemical Technology Ltd.
| | Address | Aco18,Xiaobu,Fenggang,Dongguan,Guangdong | City & ZIP
| 518111
| Country
| China 
| Phone
| For registered Members only.
| Fax
| For registered Members only.
| | Key Customers / Clientele | | | Company Profile | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical additives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the production of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for hardening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument and nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on. Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents. Stains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic rheological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint for metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating equipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for greater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to form a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit communication.
During the development process, AMMEN Imperial Group has gained clients? trust widely, based on his excellent professional ethics, the first-class commercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments. | | URL | For registered Members only. | | Rating |  (0 reviews) | | Popular tags | | |
| |
|
 | | Keywords (seperated by comma) | tap screen ink | | Product Specifications | ALABINE CA Series Glass Metal Plastic Ink
Ⅰ、Description
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
Ⅱ、Recommended Application
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE CA Series Inks)
Substrate Printing Inks Remark
Harden Acrylic Board ALABINE CA-223 + ALATIVE SN10（5:1） 70OC heat cure in 45 minute,
Then more than one week later, About 25OC
2, Test Result of the Film (ALABINE CA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Industry Category | ALABINE CA Series Glass Metal Plastic Ink | | Quality/Safety Certifications | | | Delivery Lead Time | 2018 | | Payment & Price Terms | TT | | My Offers | ALABINE CA Series Glass Metal Plastic Ink
Ⅰ、Description
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
Ⅱ、Recommended Application
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE CA Series Inks)
Substrate Printing Inks Remark
Harden Acrylic Board ALABINE CA-223 + ALATIVE SN10（5:1） 70OC heat cure in 45 minute,
Then more than one week later, About 25OC
2, Test Result of the Film (ALABINE CA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Product Portfolio / Other Products | ALABINE CA Series Glass Metal Plastic Ink
Ⅰ、Description
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
Ⅱ、Recommended Application
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE CA Series Inks)
Substrate Printing Inks Remark
Harden Acrylic Board ALABINE CA-223 + ALATIVE SN10（5:1） 70OC heat cure in 45 minute,
Then more than one week later, About 25OC
2, Test Result of the Film (ALABINE CA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
| | Customers | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical additives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the production of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for hardening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument and nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on. Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents. Stains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic rheological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint for metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating equipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for greater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to form a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit communication.
During the development process, AMMEN Imperial Group has gained clients? trust widely, based on his excellent professional ethics, the first-class commercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments.
| | Detailed Company Introduction | Aco.Amen Chemical Technology Ltd., committed to the development of the four industries, "Aco.Amin" printing supplies, "Aco.Amen" chemical additives, "Aco.Amen" surface treatment raw materials, "Aco.Amon" lubricants. He widely services in many fields, the packaging and printing industries, the production of paint and ink, electroplating industry, machinery manufacturing and transmission industries.
Aco.Amin printing supplies: Pad and screen printing ink. Metal, glass and ceramic printing ink. Printing ink for UV coat and plating surface. Printing ink for hardening PC and PMMA. PP and PET ink. Rubber ink. Craft ink for stone, wood. Stretchable ink for leather and nylon. Process ink for advertising. Instrument and nameplates special inks. Anti-counterfeiting watermark ink. Special IMD ink. Special water-based varnish and so on. Aco.Amen chemical additives: Solvent based - Rheological agents for spray. Retarder. Anti-static and anti-adhesion paste. Activator, Handling agents. Stains cleaning agents; Water borne - Ultra-fine powder wetting and dispersing agent. Organic pigment wetting and dispersing agent. High-thixotropic rheological agent. High shear rheology agent. Long-term suppression foam. Quick defoaming agents. Anti-mildew and anti-corrosion agents and so on.
Aco.Amen raw materials of surface treatment: Protect paint for vacuum plating. Protective paint for ion-plating. Insulated paint for corrosion. Protect paint for metal oxide. Protect paint for glass etching. Protective paint for abrasive blasting. Peelable protective paint. Deplate protective paint, and so on.
Aco.Amon lubricats: Industrial machinery lubrication. Circulating lubricating oil. Lubricants for food processing. Lubricants for car, shipping and rotating equipment. Sealants and piston lubricants.
Aco.Amen Chemical Technology Ltd., belongs to AMMEN Imperial Group.
From the moment being founded, AMMEN Imperial Group is always holding his belief of client-orientation, being honest and faithful and seeking for greater perfection. He makes tireless efforts on an aim to integrate different channels of resources and to promote the development of this industry, so as to form a corporate culture including the factors as follows: a fundamental principle of good faith, a promptly response, a quality guarantee and a none time-limit communication.
During the development process, AMMEN Imperial Group has gained clients? trust widely, based on his excellent professional ethics, the first-class commercial standing, high qualified products, perfect dispatching services and professional technical support.
Looking into the future, AMMEN Imperial Group expects to work closely with both our clients and our colleagues in order to obtain more accomplishments.
| | FOB Price & Port | 10000000 | | Packaging Details | 205 | | Our Team | Juen Chan
amiamen@163.com
+86-13694293265 | | Web Site | For registered Members only. |
|
|
|
|
|
| Product Details |
| Product id |
315056 |
| Visits |
27 |
| Date |
2012.01.06 |
|
|
|  |
|
|
Trademetro.net Trade Leads / Chemical / Coatings
Company Profile
Contact
TradeMetro.net Member Login
